Ford Fiesta Shifter Riser - Lightweight Carbon-Nylon

This item is made to order, please allow one week after placing the order for the item to ship.

The OEM shifter in the Ford Fiesta is known to be in an inconvenient location. Too low to the floor and too hard to reach for most drivers. This shift riser solves this problem by moving the shifter higher up and offset left, closer to the driver. Reaching the shifter quickly while steering is much faster and precise with our riser.

This shifter riser is easy to install and does not require disassembly of the stock shifter assembly. The center console will need to be removed to during installation.

Installing with the original center console has not been attempted yet. It will most likely require some modification or cutting of the center console to install because the shifter will be located off-center and near the driver.

Made in the USA out of PPA-CF, a high-strength industrial composite composed of nylon and carbon-fiber strands. The total mass of the riser is under 210g.

The threaded metal inserts on the top are made of stainless steel.

The bottom mounting holes have zinc plated steel sleeves to protect the riser from over-torquing and frequent installations.

What's Included:

• 1 Ford Fiesta Shifter Riser
• Installation hardware (4x M6 screws)
• Installation instructions

This part is sold by and shipped from Bear Prototyping, my product prototyping business. Made in the USA.